Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in San Bernardino?
Gate installation in San Bernardino typically costs $1,800 to $3,200 for a manual swing gate and $4,500 to $9,500 for an automated sliding or swing gate with an operator, sensors, and keypad or remote access. The gate itself is usually the smaller part of the bill; the operator, access control, and site work drive most of the total. We set the final price with a written estimate after we look at your property, so you know what you’re approving before any work starts.
Valor Gate Repair is a dedicated gate specialist. That means the technicians who quote your install work on gates every day, not on fences, decks, or garage doors on the side. We install manual and automated systems across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians have up to 13 years of experience, and every estimate is free. Call (866) 389-3501 to get one started.
Key Takeaways
- Manual swing gates in San Bernardino run roughly $1,800 to $3,200 installed.
- Automated sliding gates with an operator typically land between $5,500 and $9,500.
- The operator and access hardware usually cost more than the gate leaf itself.
- Slope, soil, and power routing are the three biggest swing factors on San Bernardino lots.
- We install and service the systems we install, so a failed operator isn’t a dead end with us.
Gate Installation Cost Breakdown (2026)
| Line item | Typical range |
|---|---|
| Manual swing gate (materials plus install, single leaf) | $1,800-$3,200 |
| Manual sliding gate (materials plus install) | $2,600-$5,000 |
| Automated swing gate with operator | $4,500-$7,500 |
| Automated sliding gate with operator | $5,500-$9,500 |
| Gate operator (brand and model vary) | $900-$2,600 |
| Access control (keypad, remotes, receiver) | $250-$900 |
| Safety sensors and edge protection | $200-$550 |
| Concrete footings and post setting | $400-$1,400 |
| Electrical run to the operator (if none exists) | $600-$2,200 |
| Removal and haul-away of an old gate | $150-$450 |
These are typical San Bernardino estimates, not fixed prices. The written estimate sets the final number after we see your property. The gate leaf and posts are the parts people budget for first, but the operator and access control often carry more of the total than the gate itself. On a two-leaf automated driveway gate, the operator cost doubles; that’s usually the biggest single reason a quote comes in higher than the homeowner expected.
One thing worth knowing up front: on most homes the operator, sensors, and keypad need a dedicated electrical circuit, and if there’s no power near the gate location, running that line is its own line item. We handle the gate and the operator, and we’ll walk you through how the electrical side needs to be arranged so you’re not guessing. If your system is already automated and simply stops working, that’s a different job – our electric gate repair page covers the diagnostic side.
What Affects Gate Installation Pricing in San Bernardino
- Slope and grade. San Bernardino lots on the foothill edges of the city climb and drop, and a gate that hinges on a slope needs heavier posts and often a self-closing hardware setup that a flat lot doesn’t. Slope is the single most common reason a swing gate quote moves up.
- Soil and footing depth. Posts have to sit in proper footing depth for your soil, and that means concrete work is part of most installs. Deeper footings take more concrete, more time, and more money.
- Power availability. If there’s already an outlet or circuit near the gate line, the electrical run is short. If it’s a long pull from the house or panel, the cost of the run climbs. We’ll flag this at the estimate so it isn’t a surprise later.
- Operator brand and type. A LiftMaster or Linear operator for a residential swing gate prices differently than a heavy-duty DoorKing sliding operator built for a commercial or HOA entrance. Brand and duty rating move the number.
- Access control and safety hardware. A single keypad and two remotes is one budget. Loop detectors, safety edges, intercom, and multi-user entry for an HOA property is another. The more people and vehicles need to get through, the more hardware the system needs.
- Gate material and size. A standard single-leaf residential gate and a wide commercial driveway gate aren’t the same project. Wider openings need heavier hardware, more concrete, and sometimes a different operator entirely.
Residential and commercial gate work both come through us, so whether you’re a homeowner near Del Rosa or an HOA manager handling a shared entrance, the crew working on your gate repair and install is doing it as a specialist. That matters most when the operator is the part failing, because brand-specific diagnostic knowledge is where a generalist usually stalls.
How to Save on Gate Installation
- Get the estimate before you buy the gate. Writing the operator into the plan up front is cheaper than retrofitting automation a year later. The two phases cost more separately than together.
- Choose manual if automation isn’t essential. A well-built manual gate is a real option and skips the operator, electrical run, and access hardware entirely. We’ll tell you honestly when automation isn’t worth the spend for your property.
- Keep the gate size in line with the opening. Oversizing the gate means heavier hardware and more concrete without improving the result. Fit the gate to the space.
- Handle the electrical run early. If power is already near the gate line, the install is simpler. Finding that out before you commit to a location can save the cost of a longer run.
- Don’t skip the estimate. A free on-site estimate is the only way to see what your slope, soil, and access actually call for. Call (866) 389-3501 and we’ll get one on the schedule.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our estimate is free and the price is per job, set by the written estimate. San Bernardino gate installs are part of what we do, and we don’t close the job out until the operator, sensors, and access control all work the way they should.
Which Gate Types Do We Install in San Bernardino?
We install swing gates and sliding gates, manual and automated, for both residential and commercial properties. For automated swing gates, the operator options run from LiftMaster and FAAC for residential driveways to BFT and Viking for heavier use. Sliding gates most often call for DoorKing or Elite operators when the duty rating needs to hold up to daily traffic.
Access control is the part most homeowners underestimate. A keypad and remote receiver are the minimum; if you have household members, guests, service vendors, or an HOA gate that a whole street shares, the hardware list grows. We’ll lay out which pieces your property actually needs and which are optional so the estimate is honest.
What Should You Check Before Hiring a Gate Installer in San Bernardino?
Check for an actual gate specialty, not a general handyman or fence company that also installs gates on the side. Ask which brands they work with and whether they service the operator and access control themselves or pass that off. Ask whether they’re licensed and insured, and never take a verbal yes on that question. We’re licensed and insured, and the technicians who quote your gate are the ones working on gate systems every day.
A gate is a moving, powered, heavy assembly, and the parts that fail most often are the operator and access hardware, not the gate itself. A company that installs gates but doesn’t service electric systems leaves you looking for a second company when the operator stops. We don’t. Installation, repair, and electric operator service all come from the same specialist.
FAQs – Gate Installation Cost
How much does a gate installation cost in San Bernardino?
Gate installation in San Bernardino typically costs $1,800 to $3,200 for a manual swing gate and $4,500 to $9,500 for a fully automated gate with operator and access control. The written estimate sets the final price after we see your property. Call (866) 389-3501 for a free estimate.
Is it cheaper to install a manual gate or an automated gate?
A manual gate is cheaper by a wide margin – often $2,000 to $5,000 less than an automated one. That gap is the operator, electrical run, sensors, and access control. If you don’t need automated entry, a manual gate is the lower-cost path. Call (866) 389-3501 and we’ll help you decide which fits your property.
What does a gate operator cost in San Bernardino?
A gate operator typically runs $900 to $2,600 in San Bernardino, depending on brand and duty rating. Residential-grade LiftMaster and Linear units sit toward the low end; heavy-duty DoorKing and Elite operators for commercial or HOA entrances sit toward the high end. The estimate includes the operator price in your written quote.
Do I need permits to install a gate in San Bernardino?
Most cities require a permit for a gate install that involves footings, electrical work, or a new operator circuit, so ask San Bernardino’s building department what applies to your property before you start. We’ll tell you at the estimate what the work involves so you know what to ask. Call (866) 389-3501 to get the estimate booked.
How long does a gate installation take?
A manual gate install is usually a single day; an automated gate with operator, electrical run, and access control typically runs one to three days depending on site conditions. The estimate will tell you what your specific job involves, and the written estimate sets the final price. Call (866) 389-3501 for a free quote.
Contact Valor Gate Repair today. Call (866) 389-3501 for a free estimate on your gate installation in San Bernardino. We’re a dedicated gate specialist handling installation, repai,r and electric gate service across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the San Bernardino market as of 2026. Valor Gate Repair offers free estimates – call (866) 389-3501.
What Our Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Rafael Martinez"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Sofia Garcia"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Destiny Ingram